Care Instructions; Maintenance Service - Vevor S02 Bedienungsanleitung

(S03-Pro) DC24V mobile power recommendation
voltage
DC 24V
● Before cleaning or maintenance, turn the appliance off. Wait for a few
minutes then unplug from the electrical outlet.
● Clean the appliance with a slightly damp cloth then dry with
a dry cloth. Plastic parts maintenance:
● To protect the air conditioner, it must be kept clean, and try to avoid oil stain
and deformation. If the oil is attached to the plastic parts for a long time, the
plastic parts will be aging, cracking and smell. Therefore, we should clean it
regularly.
● Never wash the air conditioner with water to prevent the electrical insulation
from reducing and rusting.
● Never use petrol, alcohol or solvents to clean the appliance.
● Never spray insecticide liquids or similar.
● The unit does not cool, please check whether the air inlet and outlet are blocked.
When using the air duct, check whether the duct is excessively bent or blocked,
which will cause the compressor overheat and stop for protection. We
recommend turnoff the air conditioner and switch on the device after 15 minutes.
● The remote control does not work:
1. Do not exceed the remote control distance (32Feet/10m).
2. Check whether the remote control is damaged.
3. Replace the battery of the remote control.
4. Pairing the remote control.
Cleaning Instructions
1. Ensure the machine is unplugged before cleaning.
2. Do not use chemical solvents like gasoline for cleaning.
3. Do not rinse directly with water.
capacity
≥150AH

CARE INSTRUCTIONS

TROUBLESHOOTING

MAINTENANCE SERVICE

- 11 -
Output power
≥3500W