Attaching/Removing The Battery Pack; Checking The Battery Pack's Charging Level; Assembly; Fitting/Removing The Grip Bracket - Parkside Pasa 20-Li D3 Bedienungsanleitung Und Originalbetriebsanleitung

1 . Insert the battery pack
charger .
[ 12 ]
2 . Connect power plug of the
charger to a socket-outlet .
[ 12 ]
3 . When the battery pack
charged:
Disconnect the power plug of the
–
charger from the socket-outlet .
[ 12 ]
Remove the battery pack
–
the charger
12 ] [
˜ Attaching/removing the
battery pack
Attaching the battery pack
1 . Slide the battery pack
handle .
[ 2 ]
2 . Ensure the battery pack
noticeably in place .
Removing the battery pack
1 . Press the release button
battery pack
3 ] [
2 . Pull the battery pack
handle .
[ 2 ]
˜ Checking the battery pack's
charging level
Press the button
o
charging level LEDs
Colour
Red/orange/green Maximum
Red/orange
Red
˜ Assembly
˜ Fitting/removing the grip
bracket
(Fig. C, D)
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments .
into the
3 ] [
is fully
3 ] [
from
[ 3 ]
.
onto the
3 ] [
clicks
[ 3 ]
on the
4 ] [
.
from the
[ 3 ]
. The
[ 15 ]
light up .
[ 16 ]
Charging level
Medium
Low
3 ] [
Fitting the grip bracket
Press the release
o
Push the grip bracket
guides on the base plate
click locks into the slot
Removing the grip bracket
Press the release
o
Pull the grip bracket
the guides .
˜ Fitting/changing the saw
blade
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments .
CAUTION! Risk of injury!
m
Saw blades are sharp and can
become hot during use . Always
wear protective gloves when
handling saw blades .
NOTICE! Risk of property
m
damage!
The teeth of the saw blade
u
point downwards .
1 . Turn the quick-release chuck
in the direction of the arrow until it
stops . Hold the quick-release chuck
in this position .
2 . Push the saw blade
quick-release chuck
3 . Release the quick-release chuck
so that it returns to its initial position .
4 . The saw blade
on both sides .
10 ] [
over the
11 ] [
until it
[ 7 ]
.
7a ] [
on both sides .
10 ] [
outwards of
[ 11 ]
[ 3 ]
must
6 ] [
8 ] [
into the
6 ] [
until it stops .
[ 8 ]
8 ] [
is now locked .
[ 6 ]
GB/CY 15