Trouble Shooting; Technical Data - Pkm Kf4R Bedienungsanleitung

CAUSES
Break in the power supply.
The sensors are locked.
Liquid on the sensors.
You used your fingertip.
You used unsuitable cookware with
sharp edges.
You used an unsuitable detergent,
e.g. an abrasive.
Some cookware make cracking or clicking noise.
Your cookware is produced with
layers made of different kinds of
metal.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact a service department.
DO NOT REPAIR THE APPLIANCE YOURSELF. If your appliance
does not operate correctly, contact your aftersales service.
Model
Control panel
Material hob
Diameter cooking zones
Power/small cooking zone
Power/large cooking zone
Maximum power

9. TROUBLE SHOOTING

ERROR
The appliance cannot be switched on.
The sensors do not respond.
The sensors are difficult to operate.
The glass ceramic is scratched.
DANGER!

10. TECHNICAL DATA

MEASURES
Check that
connected to the mains. Check the
household fuse box. Is there a power
failure at your place of residence?
Unlock the sensors.
Dry the sensors.
Use the bottom of your top phalanx.
Use suitable cookware.
Use suitable detergents.
This is normal for such a cookware
and does not indicate a malfunction.
Ceramic Hob
Vitro Ceramic,
aluminium frame right/left side
2*200 mm, 2*165 mm
41
the appliance
Sensor keys
1200W
1800W
6000W
is