Unlocking of the sensors.
1. Check that the appliance is switched on.
2. Touch and hold the key lock for some time..
3. Now you can proceed operation as normal.
A thermistor monitors the temperatures inside the appliance. The appliance stops
operating automatically if an over-temperature is detected.
The cooking zones emit residual heat after operation. An
standard warning symbol.
The automatic switch-off represents another safety component of your appliance.
The automatic switch-off is activated, when you forgot to switch off a cooking
zone after operation. The default times are described on the schedule below.
Power level
Automatic switch-off (hours) 8
You can use the timer in 2 different modes:
1. As a minute minder. The timer does not switch off a cooking zone.
2. As an automatic switch-off function. The timer switches off a cooking zone as
soon as the set time has elapsed
You can set the timer up to 99 minutes.
Mode 1 - Minute minder
1. Switch on the appliance (you can use the minute minder even you have not
selected a cooking zone).
2. Touch the
3. Set the desired time by touching the
the timer.
Each touch increases/decreases the value by 1 minute.
Touch and hold the sensor to increase/decrease the value by 10 minutes.
Over-temperature protection
Residual heat warning
Automatic switch-off
or
sensor of the timer; the timer indicator flashes.
1
2
3
4
8
8
4
Timer
or
sensors of
36
H
displayed is the
5
6
7
8
4
4
2
2
9
2