Troubleshooting - Kärcher BDP 50/1500 Originalbetriebsanleitung

DANGER
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appli-
ance.
Fault
Appliance does not start, indicator
lamp "main power" does not illumi-
nate.
Appliance does not start, indicator
lamp "main power" is illuminated.
Appliance vibrates strongly
Pad does not turn
18

Troubleshooting

In case of faults that cannot be remedied
using the table below please contact the
customer service.
Remedy
Check fuse in the building, main cables, plugs and
socket. If the fuse in the building is tripped several
times, contact customer service.
Properly operate the release, see "switching on the
appliance".
Put the handle into the working position. With the han-
dle in the upright position, the appliance cannot be
started.
Check for correct connection of the connector in the
control line.
Check pad attachment
Clean the pad
Replacing the pad
Check if foreign bodies are blocking the pad; remove
the foreign bodies if required.
– 7
EN