Product Description And Specifications - Bosch PLS 300 Set Originalbetriebsanleitung

OBJ_BUCH-1219-002.book Page 14 Tuesday, June 21, 2011 2:15 PM
14 | English
Use the saw station only for cutting the materials listed
under Intended Use. Marble or granite as well as tiles with
a rough surface structure and natural stone tiles cannot be
cut.
Product Description and Specifica-
tions
Intended Use
PLS 300: Together with the power tool, the sawing station is
intended for sawing straight lengthway and crossway cuts in
boards and profiles of hardwood and softwood, as well as alu-
minium and plastic.
Horizontal mitre angles from a maximum of –45° to +45° as
well as bevel angles from a maximum of 0° to 45° can be set.
The sawing station is intended for operation exclusively with
jigsaws from the Bosch PST DIY program.
Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
PLS 300 Set, PTC 1: Together with the tile cutter, the sawing
station is intended for cutting ceramic and nonvitreous tiles to
a maximum thickness of 10 mm.
Horizontal mitre angles from a maximum of –45° to +45° can
be set.
Technical Data
Sawing station
Article number
Sawing
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Vertical
Cutting tiles
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Weight according to EPTA-Procedure 01/2003
Dimension of suitable saw blades
Max. overall length
Max. toothed length
Only use the saw blades recommended by Bosch (see
page 129). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
1 609 929 W68 | (21.6.11)
Product Features
The numbering of the product features refers to the illustra-
tion of the sawing station on the graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle (horizontal)
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Mitre angle indicator
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300
mm
mm
°
°
mm
mm
°
kg
mm 100
mm 76
PLS 300 PLS 300 Set
(PLS 300 + PTC 1)
3 603 M04 0.. 3 603 M04 1..
315
25
± 45
± 45
–
–
–
3.4
Bosch Power Tools
315
25
± 45
± 45
340
10
± 45
3.4 + 0.2