Inhaltsverzeichnis
Werbung
Always check that the voltage of the
3
power supply corresponds to the voltage
the mains plug is damaged.
the power rating of the machine with
a minimum thickness of 1.5 mm
a extension cable reel, always fully unroll the
cable.
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue
neutral
brown
live
As the colours of the wires in the mains cable of
the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
connected to the terminal which is marked with
connected to the terminal which is marked with
TECHNICAL DATA
Power input
Max. drill bit diameter
NOISE AND VIBRATION
2
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
patterns
Your impact drill has been designed for drilling
holes in wood, metal and plastics and for hammer
drilling in brick and concrete.
PDM1016
W 1,050
12. Chuck key
pa
wa
different or poorly maintainted accessories,
it is running but not actually doing the job, may
5. Switch for mechanical speed
9. Auxiliary grip
11. Carbon brush cover
PDM1016
2
2
2
2
2
5
2
Werbung
Inhaltsverzeichnis
