Ferm PDM1016 Originalbetriebsanleitung Seite 6

ASSEMBLY
Before assembly, always switch off the
4
machine and remove the mains plug
The machine is suitable for use of the following
drill bits:
Mounting
(12) counterclockwise.
(12) clockwise.
Removing
(12) counterclockwise.
(12) clockwise.
Mounting
position.
Removing
The depth stop is used to set the maximum
drilling depth.
Mounting
the auxiliary grip (9).
Removing
grip (9).
USE
pressed, the higher the speed of the machine.
Do not change the direction of rotation
2
reverse switch (4) to the left.
2
to increase the maximum drilling speed.
counterclockwise to decrease the maximum
drilling speed.
2
the drilling speed can be continuously adjusted
between 0 and 1,100 min .
the drilling speed can be continuously adjusted
.