Leister VULCAN SYSTEM Bedienungsanleitung Seite 17

Declaration of incorporation
(in terms of the EC machinery directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
Option:
– as far as it is possible from the scope of supply – fulfills the applicable essential requirements of the
EC machinery directive (2006/42).
The partly completed machinery furthermore complies with the provisions of the following EC directive(s):
EC directive(s):
Harmonised standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled
in accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response
to a reasoned request.
Authorised documentation representative: Volker Pohl, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of the EC machinery directive (2006/42), where
appropriate.
Kaegiswil, 09.02.2016
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly
way. For EU countries only: Do not dispose of electrical equipment with household refuse!
Hot air blower
VULCAN
SYSTEM
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 61000-3-12, EN 61000-3-11 (Z
EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
) EN 62233,
max
Andreas Kathriner, GM
17