EN
General notes
12
Urinal control
PROOF U8
Congratulations on purchasing your urinal control
SanTec PROOF U8.
In order that you will be satisfi ed with this high-valued
armature for long years, we recommend considering following
points for cleaning and maintenance:
Only use gentle cleaning supplies based on soap.
Don´t use acidic cleaning supplies or disinfectant, which
scrape or rub.
Only clean by using soft sponge or cloth.
Don´t use steam stream equipment.
These instructions are valid for the following products:
SanTec PROOF U8 230 V
San Tec PROOF U8 9 V
Scope of supply:
Front plate with frame, mounting frame with integrated elect-
ronics and transformer, magnetic valve and fi xing material.
Important installation hints:
Mounting and installation must be performed by licensed
craftsmen according to DIN 1988, OVE/ONORM E8001 as well
as VDE 0100 part 701.
Make the feeder by a 2-pin main switch with minimum 3 mm
connection opening and protect with maximum 6 A!
When planning and installing sanitary systems, the relevant
local, national and international standards and regulations must
be complied with!
The "general installation conditions" at www.wimtec.com are
valid.
SanTec OCEAN U8