Commissioning; Troubleshooting; Appliance Handover; Specification - STIEBEL ELTRON CK 20 Trend LCD Bedienungsanleitung

INsTALLATIoN

Commissioning

12.4.2 Permanent connection
WARNING Electrocution
In the case of a permanent connection, ensure the ap-
pliance can be separated from the power supply by an
isolator that disconnects all poles with at least 3 mm
contact separation.
Material losses
!
f Trim the power cable so it leads directly to the appli- f
ance connection socket.
f Ensure that, after trimming the power cable, the f
appliance can still be removed from the wall without
a problem.
Material losses
!
This appliance is unsuitable for fixed electrical cables.
f Trim the power cable by cutting off the plug. f
f Connect the power cable to a suitable socket. f
13. Commissioning
The appliance is ready for operation as soon as it has been fixed
to the installation wall and plugged into the mains.
f Remove the protective film from the programming unit. f

14. Troubleshooting

The power cable must only be replaced (for example if damaged)
by a qualified contractor authorised by the manufacturer, using
an original spare part.

15. Appliance handover

Explain the functions of the appliance to the user. Draw special
attention to the safety instructions. Hand over the operating and
installation instructions to the user.

16. Specification

16.1 Dimensions and connections

275
g01
g01 Air intake
g02 Air discharge
24 | CK 20 Trend LCD
131
202
g02
CK 20 Trend LCD

16.2 Energy consumption data

The product data complies with EU regulations relating to the
Directive on the ecodesign of energy related products (ErP).
Manufacturer
Heating output
Rated heating output P
nom
Minimum heating output (standard value) P
Maximum continuous heating output P
Auxiliary power consumption
At rated heating output el
max
At minimum heating output el
min
In standby el
SB
Type of heating output/room temperature control
Single stage heating output, no room temperature control
Two or more manually selectable stages, no room temperature
control
Room temperature control with mechanical thermostat
With electronic room temperature control
Electronic room temperature control and time of day control
Electronic room temperature control and day of week control
Other control options
Room temperature control with motion detection
Room temperature control with window open detection
With remote control option
With adaptive control of heating start
With operating time limitation
With black bulb sensor

16.3 Data table

Electrical data
Connected load
Phases
Rated voltage
Frequency
Dimensions
Height
Width
Depth
Weights
Weight
Versions
Frost protection setting
IP rating
Protection class
Colour
Values
Output stages
Setting range
Operating noise
kW
kW
min
kW
max,c
kW
kW
kW
CK 20 Trend LCD
W
V
Hz
mm
mm
mm
kg
°C
Traffic white, RAL 9016
°C
dB(A)
www.stiebel-eltron.com
CK 20
Trend
LCD
236653
STIEBEL
ELTRON
2
2
2
0.000
0.000
0.000
-
-
-
-
-
x
-
x
-
x
-
-
236653
2000
1/N
~230
50/-
400
275
131
2.5
7
IP24
II
1
5 - 30
49