Operation; Menu Structure - EuroLite LED Strobe SMD PRO 540 DMX RGB Bedienungsanleutung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode
Microphone sensitivity
for sound control
Individual color mix
Dimmer
Sound control silent
scene
Slave mode
IR remote control
Display
22CH
18CH
9CH
7CH
Addr
5CH
4CH
3CH
2CH
Stat S 01-17
Au – 1
Au – 2
Auto
Au – 3
Au – 4
Au – 5
So – 1
So – 2
Soun
So – 3
So – 4
So – 5
SPEE SP 1-9
SEnS SE 1-9
r000-255
Colo g000-255
b000-255
diMM dI 1-dI 9
on
SILE
oFF
SLAU SLAU
on
InFr
oFF
25/36
22-channel mode and start address
d001-512
d001-512 18-channel mode and start address
d001-512 9-channel mode and start address
d001-512 7-channel mode and start address
d001-512 5-channel mode and start address
d001-512 4-channel mode and start address
d001-512 3-channel mode and start address
d001-512 2-channel mode and start address
Constant lighting in one of 17 colors
Program 1
Program 2
Program 3
Program 4
Program 5
Program 1
Program 2
Program 3
Program 4
Program 5
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
Total brightness (Stat, Auto, Soun,
and Colo modes)
dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music
signal
Slave mode
IR remote control on
IR remote control off
Function
00110564, Version 1.0