Replacement Of Spare Parts - Gemü R487 Victoria Betriebsanleitung

17 Disposal

16.4 Replacement of spare parts

▶ Assembly instructions for replacing the wearing parts are
included with every wearing parts kit.
16.4.1 Replacing the SVK wearing parts kit
16.4.1.1 Lug
9
9
10
11
12
1. Loosen and remove the hexagon head bolt 10 with pin.
2. Remove the support ring 7, O-ring 8 and bush 9.
3. Pull the shaft 6 out upwards.
4. Undo the threaded plug 3, remove the O-ring 4 and bush 2.
5. Pull the axis 5 out downwards.
6. Assemble the wearing parts kit in reverse order.
GEMÜ R487 Victoria
NOTICE
2
3
4
16.4.1.2 Wafer
10
7
8
7
11
6
1
12
1. Loosen and remove the hexagon head bolt 10 with pin.
5
2. Remove the support ring 7, O-ring 8 and bush 9.
3. Pull the shaft 6 out upwards.
4. Undo the threaded plug 3, remove the O-ring 4 and bush 2.
5. Pull the axis 5 out downwards.
6. Assemble the wearing parts kit in reverse order.
16.4.2 Replacing the SDS wearing parts kit
1. Disassemble the SVK wearing parts kit (see chapter "Re-
placing the SVK wearing parts kit").
2. Remove the butterfly disc 12.
3. Assemble the wearing parts kit in reverse order.
16.4.3 Replacing the SLN wearing parts kit
1. Disassemble the SVK wearing parts kit (see chapter "Re-
placing the SVK wearing parts kit").
2. Disassemble the SDS wearing parts kit (see chapter "Re-
placing SDS wearing parts kit").
3. Remove the liner 11.
4. Assemble the wearing parts kit in reverse order.
17 Disposal
1. Pay attention to adhered residual material and gas diffu-
sion from penetrated media.
2. Dispose of all parts in accordance with the disposal regu-
lations/environmental protection laws.
18 Returns
Legal regulations for the protection of the environment and
personnel require that the completed and signed return deliv-
ery note is included with the dispatch documents. Returned
goods can be processed only when this note is completed. If
96 / 100
9
9
2
3
4
www.gemu-group.com
7
8
7
6
1
5