Sms Messages - AUDIOLINE ISDN Terminal 500 Bedienungsanleitung

SMS Messages

11 SMS Messages
Conditions for using SMS
The CLIP
your telephone network provider to ensure this feature is enabled on your tele-
phone connection. In order to use the SMS
your telephone network provider.
S
A text cannot be sent from every private branch exchange extension.
S
Sending SMS messages is not available for Call−by−Call connections at
present.
S
Charges are made for sending SMS texts.
S
If the recipient in the conventional telephone network does not use an SMS
service or his telephone is not basically equipped to handle SMS
messages, the SMS is automatically converted to a voice message.
S
Costs are charged by your telephone network provider.
SMS messages received are saved in the base station. As a result, SMS mes-
sages can be read, written or transferred from each handset. When several
handsets are used, only one handset at a time can access the SMS service.
A maximum of 15 incoming SMS text messages can be stored. If the Inbox
memory is full, the corresponding message appears in the display. Delete mes-
sages to create memory space. In addition, 5 messages can be saved in the
Outbox memory and 5 in the Drafts memory. When these memories are full, the
oldest entry is overwritten as a new entry is saved.
SMS service centre
SMS messages are distributed via a Service Centre. If you want to send SMS
text messages, you must program a service centre number in your handset;
. Page 67. Please contact the provider of your choice for the necessary ser-
vice centre call numbers and the procedure for enabling the SMS service.
1
CLIP: Calling Line Identification Presentation = Display the caller's phone
number
2
SMS: Short Message Service = Service for sending text messages.
76
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 12 ct/min)
66
1
feature must be enabled for your telephone connection. Contact
If you want to send SMS text messages from a private branch ex-
change extension, it is necessary to store the public access code for
your PBX in the handset preceding the Service Centre number.
67
2
service, it must be activated by