Standby Mode; Energy−Save Mode; Navigation Buttons - AUDIOLINE ISDN Terminal 500 Bedienungsanleitung

Operating the Telephone

Standby mode

All descriptions in this operating manual assume that the handset is in Standby
mode. The system switches to Standby mode by pressing the ƒ button.
Energy−save mode
The handset switches to energy−save mode after a certain time in Standby
mode during which no button is pressed. The display is no longer lit up. Press
any button to return to Standby mode.

Navigation buttons

1
VMWI: Visual Message Waiting Indication = Visually indicates new message has
been recorded
56
Service−Hotline Germany: Tel. 0180 5 001388 (cost via Telekom at time of going to print: 12 ct/min)
Answering machine provided in the telephone network.
1
VMWI − Supplementary service offered by telephone network
providers; . Page 66.
The microphone is deactivated (muted); . Page 63.
On: The connection to the base station is good.
Flashing: The connection to the base station is deteriorating.
Move nearer to the base station.
New calls have been recorded in the call list . Page 74.
Call forwarding is activated . Page 68.
44
45
The Softkey Left and Softkey Right buttons are assigned different
functions in the different menus. The function buttons are always
referred to in this manual according to the texts directly above them
in the display.
In Standby mode: Open the phone book
In a menu: Scroll through the menu
During a call: Change the volume
In a menu: Change the setting, e.g. ringing melody or volume.
Call button: Corresponds to lifting the receiver off−hook" or placing
the receiver on−hook" on a conventional telephone.