HOMCOM 370-013 Bedienungsanleitung Seite 9

Assembly Steps
8
Vehicle connector
Motor connector
9
Motor hood
10
Seat
Fuse box
Power connector
Anode terminal
Ø4x12 flat
head screw
x 4
M5x12 machine screw
● Locate the motor connector and vehicle
connector, and plug them into each other.
Push firmly to make sure the connectors are
completely joined.
● Locate the power connector and plug it
into the anode terminal on the battery. Push
firmly to make sure the connectors are
completely joined.
● Fit the motor hood to the vehicle body.
● Tighten four Ø4x12 flat head screws to
secure it.
● Repeat for the other side.
● Insert the tabs on the seat into the slots in
the vehicle body.
● Insert the M5x12 machine screw and
tighten with a screwdriver.