HOMCOM 370-013 Bedienungsanleitung Seite 8

Assembly Steps
7
Front wheel
assembly
● Left up the vehicle head, insert the front wheel assembly into the hole in the vehicle body.
● Using a screwdriver to remove the M5x50 machine screw from the handle bar.
● Turn the vehicle body upright, fit the handle bar to the end of the front fork, line up the holes in
the handle bar with the holes in the front fork, insert the M5x50 machine screw and Ø5 nut back in
the same location and tighten with a screwdriver.
8
M5x50 machine screw
● Insert the view mirror into the hole in the
handle bar, push until you hear it click into
place.
● Repeat for the other view mirror.
Ø10nut
Handle bar
Ø5 nut