Safety Instructions; Tare Function - VOLTCRAFT TS-500 Bedienungsanleitung

1. Place the scales on a flat, even and solid surface and swing the
protective cover open.
2. Switch on the scales by pressing the on/off button (3).
The scales now perform a "power up" test. For about 3 seconds
all segments of the display are shown. Then the display changes
to "0:00" and the zero display (7) appears. Should the display not
change to "0:00", press the tare button (11).
3. Set the weighing to unit "g" (grams), "lb" (pounds), or "oz" (oun-
ces) by pressing the mode button (4). Now place the goods to be
weighed on the weighing plate (2). Make sure that the goods to be
weighed do not touch the housing or the underlay. When the
measured value has stabilized, you can read the weight of the
goods.
4. Should the weighing goods be heavier than the weighing range of
the scales, the display shows "EEEEE" (error). In case of an over-
load, remove the weighing goods immediately. Please note that
an overload can damage the extremely sensitive weighing unit.
Damages of this kind are excluded from warranty.

TARE Function

This function is especially for measuring non-solid substances such
as liquids, powder etc. The weight of the container is compensated
so that the display only shows the net weight.
1. Switch on the scales, place only the enclosed container onto the
weighing plate and wait for the display to stabilize.
2. Now press the TARE button (11), the display shows "0:00".
20

Safety Instructions

Any claims for warranty will become invalid in the
event of damage that results from the non-obser-
vance of the operating instructions. We do not
accept responsibility for any indirect losses.
We do not accept responsibility for damage to pro-
perty or for personal injuries caused by improper
use or non-observance of safety instructions. Gua-
rantees will not be accepted in any such case.
The unauthorised conversion and/or modification of the product is
inadmissible because of safety and approval reasons (CE).
For power supply only use batteries or the adapter we recommend.
Also observe the safety instructions of the adapter you use.
These scales are not a toy! Keep the scales away from children.
Do not expose these scales to heavy mechanical strain, high tem-
peratures, strong vibrations, air drafts, large temperature variations
or humidity. These scales may only be used outdoors in suitable
weather or with an appropriate protection.
These scales are a precise measuring instrument. Operation in an
environment with strong electro-magnetic radiation (electric motors,
cellular phones, transmitting masts etc.) can lead to deviations in
the display.
Any claims for warranty will become invalid when the scales have
been opened or overloaded.
17