Safety Instructions - Vevor L225-Jcl Originalanleitung

manual and the safety instructions.
2. SPECIEICATIONS
Model No.
Power
No Load Speed
Grinding pad diameter
Sandpaper diameter
Tube diameter
Weight

3. SAFETY INSTRUCTIONS

The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance
if these instructions are not followed.
Indicates the presence of electric shocks.
Read through these operating instructions carefully before using the appliance.
Become familiar with the functions and method of operation. To ensure proper
operation, always maintain the appliance according to the instructions. The
operating instructions and associated documents should always be kept close to
the appliance.
When using power tools, you must observe the following basic safety precautions
in order to ensure protection from electric shocks, injury and fire. Read and follow
all the instructions before using this power tool. Look after the notes on safety.
Always check if your mains voltage corresponds with the value on the type
plate.
The machine has been double-insulated in accordance with
EN60745:therefore,an earth wire is not necessary
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the
information quoted on the tools identification plate.
USE PROPER EXTENSION CORD:Only use an approved extension cable that is
suitable for the machine's power.The cord must have a diameter of at least 1.5mm
L225-JCL
850W
800-1700rpm
215mm
225mm
32mm
(Including all accessories)
4.77KG
- 3 -
2