Klarfit 10006714 Handbuch Seite 20

Pull the handlebar post co-
ver (13) through handlebar
post (8) to the higher positi-
on. Draw the control wire
(14) through the handle-
bar post (8). Connect bot-
tom of the trunk wire (15)
with the bottom sensor wire
(50). Connect the handle-
bar post assembly to the
main frame with inner hex
pan head bolt (6) and arc-
washer (5). Connect the
tension controller (10) with
control wire (14). (See pic-
tures A&B). Fix the tension
3
controller (10) to the hand-
lebar post (8) with cross pan
head screw (61) and bigger
arc-washer (62). Fix hand-
lebar (4) to the main frame
with inner hex pan head bolt
(6) and arc-washer (5).
Connect the wire of the
display (7) with trunk wire
(15). Draw the wire of the
display through the hole of
handlebar post (8). Connect
the wire of the handlebar
(4) with the wire of display
(7). Fix the display (7) to
the handlebar post (8) with
Cross pan head screw (9).
The following guidelines will help you to plan your exercise program. Remember that proper
nutrition and adequate rest are essential of successful results.
WARNING: Before beginning this or and exercise program, consult your doctor.
This is especially important for people over the age of 35 or those with health
problems.
20
Conditioning Guidelines