Klarfit 10006714 Handbuch Seite 19

Lock front bottom
(26) to the main frame
with cross pan head square
beck bolt (27), Arc-washer
(28) and dome nut (29).
Lock rear bottom tube (53)
to the main frame with bolt
hex bolt (60), (57) and flat
washer (56).Fasten the pe-
1 dal (44) and (31) to the
crank separately.
ATTENTION: There are la-
bels "L" and "R" on the left
and right pedals. You should
assemble the left pedal in
anti-clockwise
while the right pedal in
clockwise direction.
Connect the seat (16) to the
seat post (18) with loose-
proofed nut (17) and flat
2 washer (45). And then insert
the seat post assembly into
the main frame and fasten it
with spring knob (58).
Assembly
tube
direction
19