SMA SUNNY TRIPOWER 60 Installationsanleitung Seite 28

2 Installation
Figure 2.24 Do not connect PV to ground!
Figure 2.25: DC connection area
INFORMATION
Cables with multi-strand, fine-strand or extra
fine-strand conductors can be used for AC
connection (see figure 2.26).
When using fine-strand or extra fine-strand
conductors, bootlace ferrules must be used for the
connection.
28 STP60-10-IA-xx-11
SMA Solar Technology AG / SMA Solar Technology America LLC
Figure 2.26 Cables with different conductors (from top to bottom):
multi-strand, fine-strand and extra fine-strand
1. Switch the PV load-break switch on the inverter to "Off"
and, if available, also on the PV array junction box.
2. Connect the PV cables from the PV array junction box
to the inverter. Ensure correct polarity, see figure 2.27.
3. All wires must be properly fastened with the correct
torque. See Section 5.5, page 41.
Figure 2.27 Connect to PV input
Figure 2.28 DC label
Installation Guide