PROUSER RUBY Montageanleitung Und Sicherheitsvorschriften Seite 48

Quick coupling handle:
Tighten the quick connector handle
firmly into the quick connector handle
socket. Use a spanner if necessary.
The license plate holder and license plate:
Loosen and remove the little screws intended for the mounting of the number
plate holder from the light holder rail and fasten the number plate holder to the
rail. The number plate holder has to be level with the lighting.
Place the license plate in the license plate holder. The clips (2) to mount the
license plate can be pressed out and are in the license plate holder (see drawing
2).
1
3
2
4
48