Troubleshooting
✔ The error has been reset.
RM10.5S,
RM10.5G,
RM10.5P,
RM10.5T,
RMS10.5S,
RMS10.5T,
RMS10.5G,
RMS10.5XT
RMS10.5P,
RMS10.5XS,
RMS10.5XG,
RMS10.5XP
E03
E07
E08
E09
E12
E13
30
Fault
No connection between
power module and display
No cooling capacity in gas
mode
No cooling capacity in AC
power mode
No cooling capacity in DC
power mode
Gas valve test error
Internal communication error Gas operation not possible.
RM10.5, RMS10.5
Solution
Contact an authorized customer
service point.
Check if the device is at an angle
and adjust it so it is level, if neces-
sary.
Reset the error.
Contact customer service if this
error occurs again.
Check if the device is at an angle
and adjust it so it is level, if neces-
sary.
Reset the error.
Contact customer service if this
error occurs again.
Check if the device is at an angle
and adjust it so it is level, if neces-
sary.
Reset the error.
Contact customer service if this
error occurs again.
Gas operation is not possible.
Reset the error.
Contact customer service if this
error occurs again.
Reset the error.
Contact customer service if this
error occurs again.
EN