RIKA Interno Montageanleitung Seite 31

Pre-assembly
Attach the flue pipe adapter on the base plate.
Tipp
For an optional flue pipe connection to the top - replace flue outlet and cover
against each other.
Place the bottom plate in the appropriate cabinet.
Ensure that the base plate rests absolutely horizontal. If not - use the leveling
plates to compensate any unevenness from 1mm to max. 10mm.
After ensuring a horizontal position, secure the bottom plate.
#3
N110586
Fig .: Installation example (may vary depending on the building situation)
Note
Be sure to secure your stove safely. As the unit may be installed differently
according to the structural condition on site, the responsibility for correct
installation is upon the installer. Please consider the weight specification in
the technical data.
#19
N112133
N112132
N112131
|31
30