RIKA Interno Montageanleitung Seite 32

Stove assembly
Connect the power cord to your power line.
Slide the rails until it stops out of the housing.
Raise in the stove with a second person to the rail and the appropriate pins and
secure them immediately.
Install the optional wall covers.
Slide the stove back into the wall.
Secure the stove from below against unintentional rolling out.
Open the decorative door.
Remove the cover behind the key holder and connect the stove to the mains
plug.
Assemble the parts in reverse order.
#10
N111945
Your stove is ready now.
#7
#5
N108572
#2