SPORTSTECH SX400 Benutzerhandbuch Seite 38

FIG.3:
Slide the Handlebar Post (pt.17) into the handlebar
post housing on the main frame(pt.16). You will have
to slacken the knurled section of the L Shape Knob
(pt.26) and pull the knob back and then select the
desired height. Release the knob and retighten the
knurled portion.
Then fix the Handlebar (pt.18) with a
flat washer 1 (20) and L Shape knob (19)
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
Fix the Computer (pt.78) onto the
Computer Holder with bolt (pt.55),
connect the plug (A1&A2),
FIG 3
FIG.4:
The Pedals (pt.1 L & pt.1 R) are marked „L" and „R" -
Left and Right. Connect them to their appropriate crank
arms. The right crank arm is on the right- hand side
of the cycle as you sit on it. Note that the Right pedal
should be threaded on clockwise and the Left pedal
counter-clockwise.
FiG 4
9