Rear Panel - Yamaha MX400 Bedienungsanleitung

Rear panel

8 7
8 7 6
8 7 6
8 7 6
1
INPUT A jacks
These are unbalanced XLR3-31 type jacks which input the signal for each
input module. Use the A/B switch to select these jacks.
• Nominal input level: –60dB
Phantom power (+48 V) can be supplied to these jacks. Phantom power is
turned on/off using the PHANTOM switch.
When the PHANTOM switch is on, make sure that those devices which do
not require phantom power are connected to the INPUT B jacks (
2
INPUT B jacks
These are 1/4" phone jacks which input the signal for each input module.
Use the A/B switch to select these jacks. These are balanced TRS jacks, with
tip=hot, ring=cold, and sleeve=ground.
• Nominal input level: –60dB
3
INPUT INSERT I/O jacks (0dB)
These are 1/4" phone jacks patched in front of the input module faders.
These are unbalanced TRS jacks, with tip=out, ring=in, and sleeve=ground.
• Nominal input level: 0dB
• Nominal output level: 0dB
4
DIRECT OUT jacks (0dB)
These are unbalanced 1/4" phone jacks which output the post-fader signal
independently from each input module.
• Nominal output level: 0dB
INPUT A
6 5 4 3
INPUT B
5 4 3
INPUT INSERT I/O 0dB
5 4 3
DIRECT OUT 0dB
5 4 3
11
Rear panel
2 1
1
2
2 1
3
2 1
4
2 1
INSERT
OUT IN
2
).
MX400 User's Guide