Linea 2000 DOMO DO8141 Anleitungsheft Seite 53

Read Rules for Safe Operation and Instructions Carefully.
WARNING
1. If the supply cord is damaged, it must be replaced by manufacturer
or its service agent or a similarly qualified person in order to avoid
Uvoľnite aretovacie maticu a vysuňte si teleskopickú trubicu
a hazard.
2. Indoor use only.
na požadovanú výšku. Potom opäť utiahnite a zaaretujte.
3. To protect against the risk of electrical shock, do not immerse the
Skontrolujte či je matica dostatočne dotiahnutá.
unit, cord or plug in water or other liquid.
4. This appliance can be used by children aged from 8 years and
Uvoľnite uťahovací skrutku na zadnej časti ovládacieho panelu
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
(a), nasaďte motorovú časť na teleskopickú rúrku a dostatočne
given supervision or instruction concerning use of the appliance in
utiahnite skrutkou späť. Pred samotným spustením
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
ventilátora, ešte raz skontrolujte, či je aretovacie matica
made by children without supervision.
teleskopickej rúrky a skrutka pri motore dostatočne utiahnutý.
5. When the appliance is not in use and before cleaning, unplug the
ONS
appliance from the outlet.
6. When the fan was assembled, the rotor blade guard shall not be
taken off anymore。
ZOSTAVENIE OCHRANNÝCH MRIEŽOK A VRTULE
7. Correct Disposal of this product
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To Odstráňte poistnú maticu z osi motora (alebo nájdite
prevent possible harm to the environment or human health from
samostatne v balení) a nasaďte zadný ochrannú mriežku až za
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used
hriadeľ a otvorenú plastovou maticou dôkladne upevnite.
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this
Potom nasaďte vrtuľu ventilátora na hriadeľ, tak aby sa pevne zaaretovala do předdělaných
product for environmental safe recycling.
otvorov. Pomocou uzavreté poistné matice vrtuľu dostatočne upevnite.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
1. Align Screw Holes on the outer ring
INSTRUCTIONS FOR USE
Nasaďte predný a zadný mriežku ventilátora. Prednou mriežku najprv usaďte do spodného
of both the Front and Rear Guards,
háčika zadnej mriežky a hore spojte skrutkou s matičkou Pre istotu zaistite sponami na
s to fasten the Instructions for key of remote controller
with the Positioning Clip aligned as
uard. At the
bokoch.
arated screw
illustrated.
Screw
"SPEED" key
2 2
Buckle
Front grill
POUŽITIE
Considerate Hint:
Prístroj zapojte do el. siete a zapnite stlačením tlačítka ON / OFF.
Effective Range of Remote Control: within 5 m distance and
30-degree deflection in front of Product.
Instructions for display of body
Speed display
www.domo-elektro.be
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
illustrated.
1
Front and Rear Guard Installation
Front and Rear Guard Installation
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
illustrated.
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
4h
1h
INSTALLATION INSTRUCTIONS
Name of components
Support Installation
Align the Column Pipe
connection plate with
Front and Rear Guard Installation
holes on the support and
tighten screws.
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
and nut.
Considerate Hint:
Remove ①②parts from the
component before performing
installation.
2. Press down all the Buckles to fasten the
Blade
2. Press down all the Buckles to fasten the
Pull the blade to rotate after installing, Front Guard with the Rear Guard. At the
Front Guard with the Rear Guard. At the
so as to ensure that the blade can be
Screw Holes, tighten the separated screw
Screw Holes, tighten the separated screw
normally rotated.
and nut.
and nut.
"ON/OFF" key
3
"TIMER"key
Battery
2h Timer display
a
INSTRUCTIONS FOR USE
Instructions for key of remote
Screw
Buckle
2 2
Considerate Hint:
Effective Range of Remote Cont
30-degree deflection in front of P
Instructions for display of bod
INSTRUCTIONS FOR USE
Speed display
Instructions for operation of body
Body key
SPEED
TIMER
ON/OFF
"SPEED" key
Screw
Screw
Horizontal S
Pull-up for static
Push-d
4
Swing
Tilt Adjustmen
Buckle
Buckle
Manual
Height Adju
Turn counterclockwise
performing height adjus
Height Ad
53
DO8141