Speed Control - Linea 2000 Domo Do8141 Anleitungsheft

1. Align Screw Holes on the outer ring
Place the grill at the front on the grill at the back. Pay attention to the hook at the bottom of
of both the Front and Rear Guards,
the back grill. Place the supplied screw in the opening at the top and tighten with the supplied
with the Positioning Clip aligned as
n nut. Attach the unit using the mounting clips on the sides of the grill.
illustrated.
Front and Rear Guard Installation
e Buckles to fasten the
1. Align Screw Holes on the outer ring
e Rear Guard. At the
of both the Front and Rear Guards,
n the separated screw
with the Positioning Clip aligned as
Screw
illustrated.
Buckle
NS FOR USE
for key of remote controller
Front grill
USE
key
Put the plug in the mains. Switch the fan on with the button: ON/OFF
CONTROL PANEL
1.

Speed control

2. Timer
Blade
,
Pull the blade to rotate after installing,
3. On-off button
so as to ensure that the blade can be
normally rotated.
4. Indicator light for speed
e Hint:
ange of Remote Control: within 5 m distance and Screw the lock nut of grill clockwise,
5. Indication light for timer
deflection in front of Product. and in the meantime, fix the rear grill.
for display of body
4h
2h
y
1h
4
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
www.domo-elektro.be
Front and Rear Guard Installation
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
INSTRUCTIONS FOR USE
with the Positioning Clip aligned as
illustrated.
Instructions for key of remote controller
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
and nut.
"SPEED" key
"ON/OFF" key
Considerate Hint:
Effective Range of Remote Control: within 5 m distance and
"TIMER"key
30-degree deflection in front of Product.
Instructions for display of body
Battery
Speed display
3
Timer display
Blade Blade
Pull the blade to rotate after installing, Pull the blade to rotate after installing,
so as to ensure that the blade can be so as to ensure that the blade can be
normally rotated. normally rotated.
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
Front and Rear Guard Installation
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
INSTRUCTIONS FOR USE
and nut.
Instructions for key of remote controller
Screw
"ON/OFF" key
"TIMER"key
Buckle
INSTRUCTIONS FOR USE
Battery
Instructions for operation of body
Considerate Hint:
Effective Range of Remote Control: within 5 m distance and
30-degree deflection in front of Product.
Instructions for display of body
Body key
1
4h
SPEED
2h
Timer display
2
Speed display
TIMER
1h
3
ON/OFF
4
3
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
INSTRUCTIONS FOR USE
Screw Holes, tighten the separated screw
and nut.
Instructions for operation of body
"SPEED" key
Body key
SPEED
Horizontal Swing
TIMER
Pull-up for static
Push-down to swing
ON/OFF
Swing Pull-knob
Tilt Adjustment
Manual
4
Height Adjustment
4
Turn counterclockwise and loosen for
performing height adjustment.
Height Adjustment Key
5
3
Screw Screw
"ON/OFF" key
"TIMER"key
Buckle Buckle
MAINTENANCE I
The fan requires little m
Battery
qualified service perso
1. Before cleaning and
2. To ensure adequate
motor free of dust. D
3. Please wipe the exte
4. Do not use any abra
Do not use any of th
5. Do not allow water o
CLEANING
1. Be sure to unplug fro
2. Plastic parts should b
Thoroughly remove s
DISPOSAL：Do not dis
municipal waste, use se
4h
local government for in
5
available. If electrical a
substances can leak in
Timer display
2h
your health and well-be
1h
5
31
DO8141
H
Pull-up
Tilt A
Manual
H
Turn coun
performing