Linea 2000 DOMO DO8141 Anleitungsheft Seite 46

UTION
d Rules for Safe Operation and Instructions Carefully.
ARNING
the supply cord is damaged, it must be replaced by manufacturer
r its service agent or a similarly qualified person in order to avoid
hazard.
Uvolněte aretovací matici a vysuňte si teleskopickou
ndoor use only.
trubici na požadovanou výšku. Poté opět utáhněte
o protect against the risk of electrical shock, do not immerse the
nit, cord or plug in water or other liquid.
a zaaretujte. Zkontrolujte zda je matice dostatečně
his appliance can be used by children aged from 8 years and
ve and persons with reduced physical, sensory or mental dotažena.
abilities or lack of experience and knowledge if they have been
n supervision or instruction concerning use of the appliance in Uvolněte utahovací šroub na zadní části ovládacího panelu
afe way and understand the hazards involved. Children shall not
(a) , nasaďte motorovou část na teleskopickou trubku
with the appliance. Cleaning and user maintenance shall not be
de by children without supervision.
a dostatečně utáhněte šroubem zpět. Před samotným
When the appliance is not in use and before cleaning, unplug the
spuštěním ventilátoru, ještě jednou zkontrolujte, zda je
ppliance from the outlet.
When the fan was assembled, the rotor blade guard shall not be
aretovací matice teleskopické trubky a utahovací šroub u
ONS
aken off anymore。
motoru dostatečně utažený.
Correct Disposal of this product
This marking indicates that this product should not be
isposed with other household wastes throughout the EU. To
revent possible harm to the environment or human health from
SESTAVENÍ OCHRANNÝCH MŘÍŽEK A VRTULE
ncontrolled waste disposal, recycle it responsibly to promote the
ustainable reuse of material resources. To return your used
evice, please use the return and collection systems or contact Sejměte pojistnou matici z hřídelky motoru (nebo najděte samostatně v balení) a nasaďte
he retailer where the product was purchased. They can take this
zadní ochrannou mřížku až za hřídel a otevřenou plastovou maticí důkladně upevněte. Poté
roduct for environmental safe recycling.
nasaďte vrtuli ventilátoru na hřídel, tak aby se pevně zaaretovala do předdělaných otvorů.
LES FOR SAFE OPERATION
Pomocí uzavřené pojistné matice vrtuli dostatečně upevněte.
ever insert fingers, pencils, or any other object through the grille when fan is
nning.
sconnect fan when moving from one location to another.
e sure fan is on a stable surface when operating to avoid overturning.
O NOT use fan in window, rain may create electrical hazard.
ousehold use only.
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
Nasaďte přední a zadní mřížku ventilátoru. Přední mřížku nejdřív usaďte do spodního háčku
with the Positioning Clip aligned as
zadní mřížky a nahoře spojte šroubkem s matičkou Pro jistotu zajistěte sponami na bocích.
illustrated.
2 2
46
DO8141
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
illustrated.
1
Front and Rear Guard Installation Front and Rear Guard Installation
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
illustrated.
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
INSTALLATION INSTRUCTIONS
Name of components
Support Installation
Align the Column Pipe
connection plate with
holes on the support and
tighten screws.
Front and Rear Guard Installation
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
and nut.
Considerate Hint:
Remove ①②parts from the
component before performing
installation.
2. Press down all the Buckles to fasten the 2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the Front Guard with the Rear Guard. At the
Blade
Screw Holes, tighten the separated screw Screw Holes, tighten the separated screw
Pull the blade to rotate after installing,
so as to ensure that the blade can be
and nut. and nut.
normally rotated.
3
a
INSTRUCTIONS FOR USE
Instructions for key of remot
Screw
"SPEED" key
Buckle
2 2
Considerate Hint:
Effective Range of Remote Co
30-degree deflection in front o
Instructions for display of bo
Speed display
Screw
1. Align
of both
with th
illustra
Screw
and in
Screw
Buckle Buckle