Linea 2000 DOMO DO8141 Anleitungsheft Seite 39

Coloque la parrilla delantera en la parrilla trasera. Presta atención al gancho en la parte
1. Align Screw Holes on the outer ring
inferior de la parrilla trasera. Inserte el tornillo suministrado en la abertura de la parte superior
of both the Front and Rear Guards,
y apriete con la tuerca suministrada. Fije el conjunto con ayuda de los clips de fijación en los
INSTRUCTIONS FOR USE
with the Positioning Clip aligned as
laterales de la parrilla.
Front and Rear Guard Installation
illustrated.
Instructions for operation of body
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
2 2
with the Positioning Clip aligned as
illustrated.
INSTRUCTIONS FOR USE
Body key
Instructions for key of remote controller
USO
SPEED
TIMER
Introduzca el enchufe en la toma de corriente. Encienda el ventilador con el botón. ON/OFF
"SPEED" key
ON/OFF
PANEL DE CONTROL
1. Control de velocidad
2. Temporizador
Blade
Pull the blade to rotate after installing,
3. Botón de encendido/apagado
so as to ensure that the blade can be
normally rotated.
4. Lámparas indicadoras de velocidad
Considerate Hint:
Effective Range of Remote Control: within 5 m distance and
Screw the lock nut of grill clockwise,
5. Lámparas indicadoras del temporizador
30-degree deflection in front of Product.
and in the meantime, fix the rear grill.
Instructions for display of body
Speed display
www.domo-elektro.be
Front and Rear Guard Installation Front and Rear Guard Installation
1. Align Screw Holes on the outer ring
of both the Front and Rear Guards,
with the Positioning Clip aligned as
Screw the lock nut of grill clockwise,
illustrated.
and in the meantime, fix the rear grill.
2. Press down all the Buckles to fasten the
Front Guard with the Rear Guard. At the
Screw Holes, tighten the separated screw
and nut.
Horizontal Swing
Pull-up for static
Tilt Adjustment
Manual
"ON/OFF" key
"TIMER"key
Height Adjustment
Turn counterclockwise and loosen for
performing height adjustment.
Battery
5
3
4h
2h Timer display
1h
Blade Blade
4
Pull the blade to rotate after installing, Pull the blade to rotate after installing,
so as to ensure that the blade can be so as to ensure that the blade can be
normally rotated. normally rotated.
Blade
Pull the blade to rotate after installing,
2. Press down all the Buckles to fasten the 2. Press down all the Buckles to fasten the
so as to ensure that the blade can be
normally rotated.
Front Guard with the Rear Guard. At the Front Guard with the Rear Guard. At the
MAINTENANCE INSTRUCTION
Screw Holes, tighten the separated screw Screw Holes, tighten the separated screw
INSTRUCTIONS FOR USE
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
and nut. qualified service personnel if service is needed. and nut.
1. Before cleaning and assembling, fan must be unplugged.
Instructions for key of remote controller
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
3
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
Screw
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
Push-down to swing
Swing Pull-knob
Buckle
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
INSTRUCTIONS FOR USE
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.
Instructions for operation of body
DISPOSAL：Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities. Contact your
local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging
your health and well-being.
Instructions for display of body
Body key
Height Adjustment Key
1
SPEED
2
TIMER
3
ON/OFF
Buckle
"SPEED" key
Considerate Hint:
Effective Range of Remote Control: within 5 m distance and
30-degree deflection in front of Product.
4
Speed display
6
5
Considerate Hint:
Effective Range of Remote Cont
30-degree deflection in front of P
Instructions for display of bod
Speed display
Screw Screw
"ON/OFF" key
"TIMER"key
Buckle Buckle
Battery
Horizontal Swing
Pull-up for static
Push-down to swing
Swing Pull-knob
Tilt Adjustment
Manual
4h
5
Timer display
2h
1h
Height Adjustment
4
Turn counterclockwise and loosen for
performing height adjustment.
Height Adjustment Key
39
DO8141
MA
The
qual
1. Be
2. To
m
3. Pl
4. D
D
5. D
CL
1. Be
2. Pl
Th
DISP
muni
local
avail
subs
your