STORAGE OF THE LAST 1000 TEST RESULTS
1. 1 When ALCO is shown on the display, press and hold the „up" button for 2 seconds.
2 seconds and the test result MEM #0 is displayed.
1.2 If you press the up button again, the display jumps to MEM #1, which is the test
number. After one second, the corresponding result is displayed. If you press the
upper button again, you will jump to MEM #2 and so on. This can be continued
up to MEM # 999.
If you press the lower button, it jumps to MEM #9, 8, 7 etc. and the corresponding
measurement results.
Attention: All stored data records (MEM #0-999) are deleted if the power supply is
interrupted (= when the slider on the right-hand side of the device is is pushed down
or moved to the red position).
ACE INSTRUMENTS RECOMMENDS
• Always use a new mouthpiece for each person and test that is conducted. ACE
Instruments assumes no liability for any damages that may arise when several
people use the same mouthpiece for multiple tests.
• Only use the provided individually packaged and hygienic mouthpieces. During
each test the breathalyzer' s internal and external parts come into contact with
human secretion (saliva, blood, sweat, etc.)!
• Use safety gloves when pulling out a mouthpiece used by another person! You
can buy appropriate gloves at ACE Technik (www.ace-technik.com).
IMPORTANT NOTICE
• WHEN YOU HAVE EATEN, DRUNK ALCOHOL OR, SMOKED A CIGARETTE, WAIT
AT LEAST 15 MINUTES BEFORE STARTING THE MEASUREMENT. ANY TEST
CONDUCTED PRIOR TO THE EXPIRATION OF THE RECOMMENDED WAITING
PERIOD WILL RESULT IN INACCURATE RESULTS.
• IF THE TEST RESULT IS BELOW 0. 1 0‰ (PER MILL = g/L) OR 0.01% BAC (US
setting) OR 0.05mg/L (UK settting) THEN THE DEVICE SHOWS 0.00 (‰ OR %
BAC OR mg/L – depending on the setting) ON THE DISPLAY. THIS HAPPENS
BECAUSE AT A LOW RANGE OF ALCOHOL CONCENTRATION IT IS POSSIBLE
TO MEASURE OTHER MATERIALS IN YOUR MOUTH.
• This breathalyzer is a high quality and sensitive measurement device. To maintain
the accuracy of the sensor, it should regularly be used. If the device is not used for
an extended period, the sensor can dry out. ACE Instruments recommends using
the breathalyzer at least 2 times per month (even if you have not been drinking
alcohol).
• Due to changes in the product, the procedures stated can change. This can take
place without prior notice or adaptation of the operating manual and is no cause
for complaint, return or price reduction. The user is responsible for recognizing
discrepancies between the operating manual and the actual handling of the breat-
halyzer and must react accordingly.
12