Ruris RX555S Handbuch Seite 51

Caution: Periodically inspect the knife adapter for cracks, especially if you
hit a hard object. Replace it when necessary.
When sharpening the knife follow the original angle of the edge as a reference point. It is
extremely important that each cutting part of the knife is equally sharpened to prevent the
knife from becoming unbalanced. An unbalanced blade will cause excessive vibration
when the engine revs. Before reinstalling the blade and blade adapter, lubricate the motor
shaft with oil. Be sure to install the blade with the numbered face down when the machine
is in the operating position.
⚫
Insert the blade adapter into the motor shaft.
⚫
Place the knife in the adapter. Make sure it is aligned and seated on the adapter.
⚫
Place the flat washer on the blade.
⚫
Replace the Hex HD screw.
NOTE: To be sure that the machine is working well, the knife screw should be inspected
periodically ( tightness).
Emergency stop handle: Lubricate the pivot
points of the stop handle at least once a season
with oil
Wheels: Lubricate the wheels at least once a
season with oil (engine oil). If the wheels are
removed for any reason, lubricate the rear axle
surface and the inner surface of the wheel with oil.
The first 5 hours
Every 5 hours
Every 25 hours /6 months
change Uleiule
check THE the oil
Clean the residues SUBMITTED in the
follow USE
check the air filter
Clean Exhaust pipe _
change oil
check SPARK
EN
23