Turning Off The Track Power; Changing Operating Information During Emergency Stop/Off - Lenz Digital Plus Lh100 Informationsblatt

Information LH100 V3.6
5.5.1

Turning off the track power

If an emergency stop has been triggered, you can still turn off the power
to the track:
Press On the display you see
5.5.2 Changing operating information during emergency
stop/off
During the emergency stop/emergency off you can change the
operating information that will be sent to the locomotives on the layout
once you resume operation. This allows you to fix the problem that
caused you to emergency stop the layout before you resume
operation.
alternates with
(flashes)
Explanation
Call up the locomotive address whose
function setting you want to display or
change
The emergency stop is displayed.
The display "OFF FO" is designed to
remind you of the key stroke
sequence needed to turn off the track
power:
You start the power off sequence by
first pressing the 'F' key.
Next you press the '0' key. The track
power is now turned off
Pressing the 'St' key a second time
resets the emergency stop, the track
power is turned on again.
27