Error Messages When Assembling A Double Header - Lenz Digital Plus Lh100 Informationsblatt

34
7.5 Error messages when assembling a double
header
If you made an error when assembling the double header, you will see
one of the following messages in the display:
ERR The locomotive was not selected or no command to the
locomotive was sent prior to setting up the MU/double
24
header.
One of the locomotives of the MU/double header is being
ERR
operated on another Handheld.
25
ERR One of the locomotives is already part of another MU/double
header.
26
ERR One of the two locomotives was not at throttle position 0.
Locomotives must be stopped before you can combine them
27
into a consist.
Press the 'Cl' key to clear the error message from the display and
return to locomotive control.
Information LH100 V3.6