Installation Instructions; System Components; Safety Instructions - STEINEL IR 180 UP Bedienungsanleitung

Installation Instructions

Dear Customer,
Congratulation on purchas- manufactured, tested and
ing your new STEINEL packed with the greatest
Sensor Switch and thank care. Please familiarise
you for the confi dence yourself with these instruc-
you have shown in us. You tions before attempting to
have chosen a high-quality install the Sensor Switch
product that has been as prolonged reliable and

System components

IR 180 UP:
HF 360 UP:
Flush box
Flush box
Basic element
Basic element
Cover frame
Cover frame
Surround
Surround
Sensor unit
Sensor unit
Button for permanent
Button for permanent
light and permanent
light and permanent
light OFF
light OFF
Permanent light and
Permanent light and
permanent light OFF
permanent light OFF
indicator (red LED
indicator (red LED)
behind lens)
Catch
Catch
(Design shade for
(Design shade for
function adjustment,
function adjustment,
folding)
folding)
Twilight setting
Twilight setting
2 - 2000 lux
2 - 2000 lux
Time setting
Time setting
10 sec. - 30 min.
10 sec. - 30 min.
Reach setting
1 - 8 m

Safety instructions

a
 Disconnect the power
switch OFF the power
supply before any work fi rst and check freedom
on the Sensor Switch! from voltage with a volt-
age tester.
a
 During installation, the
a
 Installation of the Sensor
electric power cable to
be connected must be Switch involves work on
voltage-free. Therefore, the mains power supply;
trouble-free operation will
only be ensured if it is fi tted
correctly.
We hope your new Sensor
Switch will give you lasting
satisfaction.
NF 50 UP:
Flush box
Basic element
Cover frame
Surround
Sensor unit
Orientation light
(red LED)
this work must therefore
be carried out profes-
sionally in accordance
with regulations.
- 14 -
Principle
With the IR 180 UP and
automatically on entering
HF 360 UP sensor switches,
the room and OFF again
groping for the light switch
after the preset time. This
is fi nally a thing of the past!
is not only extremely con-
The intelligent sensor tech-
venient, but also increases
nology switches the light ON
safety and is energy and
IR 180 UP: HF 360 UP:
8 m
max.
Angle of coverage: 180° Angle of coverage: 360°
The IR 180 UP is equipped The HF 360 UP is an active
with a pyro sensor which motion detector. It reacts
detects the invisible heat independently of tempera-
emitted by moving objects ture to the slightest move-
(pedestrians, animals etc.). ment. The integrated HF
The heat thus detected is sensor transmits high fre-
electronically converted and quency electromagnetic
switches ON connected waves (5.8 GHz) and
consumers (e.g. a light). No receives their echo. In
heat radiation is detected response to the slightest
through obstacles, such movement in the detection
as walls or glass and no zone, the change in echo is
switching therefore occurs. perceived by the sensor. A
microprocessor subsequent-
ly triggers almost without
delay the switching com-
mand „light ON". Detection
is possible through doors,
panes of glass or thin walls.
cost saving. The NF 50 UP
has a near fi eld sensor for
contact-free switching.
NF 50 UP:
8 m
max.
Reach 5 m max.
The NF 50 UP has a near
fi eld sensor system that
allows contact-free ON and
OFF switching of installed
lights. Switching of the light
is therefore possible with
damp or dirty hands. The
switch is triggered by a
movement of the hand at
a distance of max. 5 cm.
- 15 -
5 cm
max.