Disposal; Troubleshooting - AL-KO Easy Crush LH 2800 Betriebsanleitung

en
CAUTION!
Damage to the machine due to improper
operation!
Incorrect handling can result in machine
damage!
Only feed materials to be shredded af-
ter the machine was switched on. Do not
feed materials to be shredded after the
machine was switched off.
WARNING!
Risk of injury due to revolving tools!
Revolving tools can cause severe hand
and finger injuries!
When working on the cutting tool, discon-
nect the machine from the mains con-
nection and wait for the tool to stop mo-
ving.

TROUBLESHOOTING

Malfunction
Motor does not start.
Machine does not pull in
materials to be shredded.
Materials to be shredded
are not properly cut.
Motor switches off.
20
Possible cause
Direction of rotation switch in zero
position.
Grass catcher missing or not lo-
cked.
Mains socket (house installation)
defective.
Extension cable defective.
Direction of rotation of the cutting
drum incorrect.
Grass catcher overflowing (mate-
rial backing up in the cutting drum).
Cutting drum clogged with wet ma-
terials to be shredded.
Counterplate in the cutting unit not
correctly adjusted.
Motor protection switch switched
off due to cutting drum overload or
blockage.
Working behaviour and working technique
WARNING!
Risk of injury due to long materials to be
shredded!
Longer materials to be shredded can
strike out and cause injuries!
Maintain sufficient safety distance.
WARNING!
Risk of injury due to negligence!
Loss of balance due to negligence can
cause most severe injuries!
Never feed the shredder from an eleva-
ted position.

DISPOSAL

Do not dispose of old
equipment,batteries or accumulators
as householdwaste!
Product, packaging, and accessories
were made with recyclable materials, and
should be disposed of accordingly.
Solution
Turn the direction of rotation switch
to the left or right.
Push grass catcher in completely
and lock it.
Use different mains socket.
Check cable and replace it as nee-
ded.
Turn direction of rotation switch to
the left (normal operation mode).
Empty grass catcher.
Remove clogging by feeding
branch material.
Readjust counterplate, see "Read-
justing the counterplate".
The motor can be switched on
again after a cool-down phase of
approx. 5 minutes.
Easy Crush LH 2800