Orno INDI MULTI P Betriebs- Und Montageanleitung Seite 14

- Monitoring
To preview the camera image, press
MONITORING button. Press the same button again
to return to standby mode.
Important:
When the device is in preview mode, you can start a conversation
button. To open the door, press the open button. In this mode you can adjust the volume, brightness and color saturation.
- Intercom
Monitor A
I.Press the INTERCOM
26
the To open the outside gate, press the GATE
CONTROL button.
Monitoring time: approx. 40 seconds.
After 40 seconds, the monitor will
automatically
standby mode.
with a person standing outside by pressing the TALK
Monitor B
button to start communication between the monitors.
To start a conversation,
the standby mode, press the TALK button again.
- Adjusting the brightness,
return to
BRIGHTNESS
COLOR
VOL
Monitor B
press the TALK button on the monitor. To end the call between monitors and return to
colour and volume of the conversation
o
Press the MENU
monitoring
BRIGHTNESS parameter,
buttons( A/ Y
Press the MENU
the COLOR parameter,
buttons (A/ V).
Press t heMENUbutton g. Thescreen wil display
the VOLUME
buttons (A/ V
Monitor A
button during a call or in
mode. The screen will display the
which you set with the
button .The screen wil display
which you set with the
parameter, which you set with the