Herunterladen Inhalt Inhalt Diese Seite drucken

Orno INDI MULTI P Betriebs- Und Montageanleitung Seite 10

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

TABLE
Elements
of the set
Set construction
Installation
Monitor
installation
Wiring scheme
Operation
Cleaning and maintenance
Troubleshooting
Technical
data
INTRODUCTION
WARNING
Please read this manual carefully before installing and using the device. In case of any problems with understanding
its contents, please contact the seller.
The device can be installed and started up on its own, provided that the assembler has basic knowledge of electronics
and uses appropriate tools. However, it is recommended that the device be installed by qualified personnel.
The manufacturer
is not responsible for any damage that can result from improper device installation
Any repair or modification
carried out by yourselves results in loss of guarantee.
In view of the fact that the technical data are subject to continuous
to make changes to the product
characteristics
deterioration
of the product parameters or functional
available at www.orno.pl
Orno-Logistic
Sp. z 0.0. holds no responsibility
for the results of non-compliance
Manual. Orno Logistic Sp. z 0.0. reserves the right to make changes to the Manual - the latest version of the Manual
can be downloaded from www.orno.pl.Any
translation/interpretation
are reserved.
Each household is a user Of electrical and electronic equipment, and hence a potential producer Of hazardous waste for
humans and the environment, due to the presence of hazardous substances, mixtures and components in the equipment.
On the other hand, used equipment is valuable material from which we can recover raw materials such as copper, tin,
glass, iron and others.
The weee sign placed on the equipment, packaging or documents attached to it indicates the need for selective collection of waste
electrical and electronic equipment. Products so marked, under penalty of fine, cannot be thrown into ordinary garbage along with other
waste. The marking means at the same time that the equipment was placed on the market after August 13, 2005. It is the responsibility
of the user to hand the used equipment to a designated col ection point for proper processing. Used equipment can also be handed over
to the seller, if one buys a new product in an amount not greater than the new purchased equipment of the same type. Information on
the available collection system of waste electrical equipment can be found in the information desk of the store and in the municipal
office or district office. Proper handling of used equipment prevents negative consequences for the environment and human health!
OF
CONTENTS
or operation.
modifications,
the manufacturer
reserves a right
and to introduce
different
constructional
solutions
quality. Additional
information
about ORNO products are
with the provisions of the present
rights and copyright in relation to this Manual
.19
20
2x Monitor
2x Monitor
mounting frame
21
- IOX Screws
23
- lx
Diode
8x Proximity tags (6 user tags, 1 add tag,
. 24
1 delete tag)
25
30
. 30
31
without
ELEMENTS
OF THE
SET
lx
Outdoor
station
- lx
Installation
box for cassette
- IOX Plastic plug
- lx Installation and operation manual
2x Power supply
- lx Allen key
lx 5m cable
GOD
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Or-vid-vp-1072/b

Inhaltsverzeichnis