Orno INDI MULTI P Betriebs- Und Montageanleitung Seite 12

5. Take out the name plate and write the correct name or room number on it.
6. Prepare a hole in the wall for mounting the installation
height of camera placement is 1.4—1.7m. Place the installation
7. Insert the cassette into the installation box and fasten
22
box and cassette (hole dimensions 110x158x57mm).
box in the prepared hole and fasten it with 4 screws.
it with the screws in front of the cassette.
Suggested
2. Monitor installation.
1. Use the screws to fix the supplied mounting frame to the wall.
2. Hang the monitor on the mounting frame, connect the wires, and then plug the power supply into an socket.
COD
1,65m
Ø 6mm
23