Power Supply - Decoderwerk 80202 Benutzerhandbuch

Commissioning
The decoder is supplied with power via
◆
the connection of the drive.
No separate power supply can be
◆
connected.
In analog mode, a continuous voltage must be
◆
applied to the usual track connection. The
switching then takes place via K1 and K2 by
connecting them to ground or GND.

Power supply

Voltage range
9-24V
◆
Protocols
DCC
◆
Märklin Motorola
◆
Power requirement
Quiescent current below 10mA
◆
The current requirement of the output
◆
depends on the connected drive. Motor
approx. 200mA
7