5 IN 1 WORKBENCH
Important safety instructions
WARNING: To reduce the risk of injury, read and understand all instruction before using this
product. Failure to follow all instructions below may result in serious personal injury. Save
this manual for future reference.
• When using this product in the scaffold mode, place your feet firmly in the centre of the platform. Do
not step on the corners of the surface, as this could cause the product to tip over and lead to injury.
• When using this product as cutting workbench or fixture table, place objects in the centre of the
surface. Placing objects on the corners could cause the product to tip over.
• The worktable must stand on a flat and stable surface.
WARNING: When using this product as creeper or dolly, do not step or stand on this product,
as this may cause personal injury:
• Place objects in the centre of the dolly take care that objects will not slip or crash from surface.
• If the ground is uneven, the rollers can suddenly get caught and the cargo could slip or fall.
• When extending or retracting the legs, do not use excessive force, as this may damage the product.
• Before use, make sure that the legs are tightly locked in position.
• The latches for the top panel have to be locked tightly.
• Do not use or alter this product for any purpose other than specified in this manual.
• Coarse dirt can affect the functions of this product.
• Please keep moving parts clean.
• Liquids on the platform pose a risk of slipping and accidents.
• Before use, please make sure that the platform is clean.
• Before use, the product must be checked for cracks, loose connections or other damage. In case of
abnormalities, don't use this product as otherwise there is a risk of accident.
Technical data
Mode:
Fixture Table
Cutting Workbench
Scaffold
Dolly
Creeper
Weight capacity:
150 kg
200 kg
250 kg
100 kg
100 kg
© DUKE & VALE
English
Dimension:
81.5 x 54.2 x 82 cm
81.5 x 54.2 x 72 cm
81.5 x 54.2 x 56.5 cm
81.5 x 54.2 x 15 cm
81.5 x 54.2 x 15 cm
7