Mode Conversion - Duke & Vale Fixture Table Betriebsanleitung

5 IN 1 WORKBENCH

Mode Conversion

Dolly / Creeper mode.
Open the diagonal latch to
secure the legs for Scaffold
mode.
Tear off the burr on the fixture
legs.
Press the positioning spring
pin on the legs of the table to
extend the legs to the middle
positioning hole for the Cutting
Workbench mode.
© DUKE & VALE
English
Unfold the legs of the table.
Press the positioning spring
pin on the legs of the table to
extend the legs to the bottom
positioning hole for the Fixture
Table mode.
3