Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4 Usage of the machine provided with timer
The timer is an electromechanical device that allows to program from 1 to 30 minutes.
· The work-time of the machine by rotating the knob 0 in the desired position (PICT. 13).
· Operate the machine following the instructions of par. 3.1 or 3.2 or 4.3.
· Once the set time is over, the timer stops the machine.
INFORMATION
Before taking off the dough beware of following the stop procedure of par 3.1 or 3.2.
38
SPIRAL MIXER - iM Series Operating manual
Werbung
Kapitel
Inhaltsverzeichnis
