Moretti Forni iM 5 Bedienungsanleitung Seite 37

3.3 Working test machine
Single-phase or three-phase machine (mod. iM 5 - iM 8):
OPERATING: push the green button A to start the bowl and the spiral.
STOP: push the red button to stop the bowl and the spiral.
Single-phase or three-phase machine (1-2 vel.)
OPERATING: rotate the knob of the switch C in position 1, set the time of mixing by the
timer F, push the green button D to start the bowl and the spiral.
STOP: rotate the knob of the switch C in position 0, or push the red button E to stop the
bowl and the spiral. In order to operate the machine again after the stop due to the raising
of the protection I or to the activating of the emergency button E it is necessary to proceed
as follows: lower again and completely the protection I; release the button E by rotating in
clockwise, as shown by the arrow, and push the operating button D.
Note: In a machine fed electrically by three-phase, if the rotation of the bowl is opposite the
way shown by the arrow it is necessary to follow these indications for the functioning and
every time you change the electric plug:
· Stop the machine.
· Take the plug out.
· Reverse on the plug the position of two phases (example: L1 with L2 and vice versa).
· Restart the machine and verify if the bowl is rotating the right way.
Start the machine without using it, let it on for about one minute and verify that
it is functioning perfectly.
35
SPIRAL MIXER - iM Series Operating manual