EN
28
Mounting and commissioning
General
1�
Glue on seals inside and outside
inner seal
outer seal
3�
Maintenance flap
5�
Open the pre-shut-off
CONTI Sanitärarmaturen GmbH | Hauptstraße 98 | 35435 Wettenberg | Deutschland | Tel. +49 641 98221 0 | Fax +49 641 98221 50 | info@conti.plus
www.conti.plus | Druckfehler und Irrtümer sowie technische und maßliche Änderungen vorbehalten. | Errors and technical changes remain reserved.
!
Rear side
6V
6V
Battery and
control accessible
through upper
maintenance flap�
Open
Close
2�
Attach the stand shower to the base plate and
connect the compression fitting�
3x
4�
Make plug connections if not connected at the
factory (see page 29)
6�
Carry out a function test and check for leaks
Start / Stop
AF 49
IP68
30 s.
(3 - 180 s.)