diagral RP550 Handbuch Seite 58

CLOSING AND INSTALLING
Cut a wire passage in the front panel.
1
Hang the top part of the front panel on the
2
base.
Close the front panel over the base as
3
shown in the diagram.
Clip the front panel onto the base using the
4
locking pins.
Push the twisted antenna wire in the tube.
5
Remount the sleeve and trap it in the notch.
6
Tighten the set screw.
7
THE ANTENNA
58
wire passage
set screw
GB
front panel
base
antenna
sleeve