diagral RP550 Handbuch Seite 55

Application 2- Control a flashing light AF500 (or a 230 V electric device)
You want to...
Activate a flashing light AF500
(or an electric device) for
30 minutes in the event of break
in, fire, tamper-proofing or
emergency call.
The function described below can be selected with application 2.
Give confirmation of the OFF
or COMPLETE OPERATION
+
(or GROUPS A + B OPERATION)
order for your system (application
3).
Application 3- Give confirmation that the house protection is on COMPLETE OPERATION (or
GROUPS A + B OPERATION) or OFF
You want to...
Give confirmation that the
protection is on COMPLETE
OPERATION (or GROUPS A + B
OPERATION) or OFF.
Position of the
microswitches
Put microswitch 5 in
this position without
changing the position
of the other
microswitches.
Position of the
microswitches
55
Operation
The flashing light is switched off
either automatically after
30 minutes or by sending the OFF
command
Brief activation (2 sec) of the
flashing light (or electric device)
each time an Off or Complete
Operation (or Groups A + B
Operation) order is sent.
Operation
Brief activation or deactivation of
the light (or flashing light or
electric device) each time an Off
or Complete Operation (or
Groups A + B Operation) order
is sent.
GB