diagral RP550 Handbuch Seite 57

Warning: All connections must be made
with the 230 V power supply switched off
and in the order indicated.
Connections must be conform to the applicable
electrical rules and standards.
Connect the 230 V device (maximum power
1
1000 W) to be controlled.
Connect the power supply cable (not sup-
2
plied).
Fix the cables to the wall using suitable
3
fixing collars (not supplied).
Important notes:
if you want to control a motor, a relay, a
transformer or a neon light, the output should
be protected using a resistor and a capacitor (
wound resistor 22 ohms - 3 watts - C : interference-
suppression capacitor class X2, 250 volts AC,
not supplied,
2.2 microfarads)
if you want to control a class I device (device
requiring an earth connection), the earth-device
connection must be made.
CONNECTIONS
R :
57
3
2
230 V - 50 Hz
power supply,
protected and isolatable
230 V - 50 Hz
power supply
GB
1
Connection of the
230 V device to be
controlled
(max 1000 W)
R C
2,2 µF x MKT SH HPF
250 V
Motor, relay, neon,
transformer (max power
1000 VA)